Kuwait Oil Ministry’s New ISO Certifications 2026 and the Role of ISO Consultancy

New ISO Certifications

Food manufacturers and other businesses in Kuwait’s food supply chain need to review their food safety procedures as the FSSC 22000 certification scheme moves to Version 7. Published on 1 May 2026, the new version incorporates updated prerequisite programme (PRP) standards from the ISO 22002-x:2025 series. Companies must check which standards apply to their activities and identify changes needed in their existing food safety management systems.

For businesses preparing for FSSC 22000 Version 7 Kuwait, the main task is to compare current procedures with the revised requirements, document any gaps, and implement the necessary changes before the upgrade audit. Finsoul Network Kuwait offers consultancy in the Kuwait market for businesses reviewing their management system requirements. Certification itself must be obtained through an appropriately licensed certification body.

What Is FSSC 22000 Version 7?

FSSC 22000 is a food safety management system certification scheme used by organisations across the food supply chain. It combines three main elements:

  • ISO 22000 requirements for food safety management systems.
  • Prerequisite programmes (PRPs) relevant to the organisation’s sector.
  • Additional requirements specified by the FSSC 22000 scheme.

Version 7 was introduced to incorporate the revised ISO 22002-x prerequisite programme standards, align the scheme with the Global Food Safety Initiative (GFSI) 2024 benchmarking requirements and strengthen certain sustainability-related requirements. It also revises the structure of food chain categories and includes further clarifications.

These changes affect how organisations establish and maintain the conditions needed for safe food production, handling, storage and distribution. The exact requirements depend on the organisation’s activities and certification scope.

What Are the Main PRP Changes in Version 7?

The most significant change is the introduction of the ISO 22002-x:2025 series. Previously, Version 6 referred to the applicable ISO/TS 22002-x standards and other prerequisite programme specifications. Version 7 uses a revised structure that combines common requirements with standards for particular sectors.

1. Introduction of ISO 22002-100:2025

ISO 22002-100:2025 establishes common prerequisite programme requirements across relevant parts of the food chain. It provides a shared foundation for organisations that must also apply a sector-specific standard.

For a food manufacturer, this means reviewing the common requirements alongside ISO 22002-1:2025. Meeting the common requirements alone is not sufficient when the scheme requires an additional sector-specific standard.

Businesses preparing for FSSC 22000 Version 7 Kuwait should identify which parts of the new series apply to their operations before updating procedures or training employees.

2. Revised Sector-Specific PRP Standards

Different food chain activities require different controls. The relevant PRP standard depends on whether an organisation manufactures food, handles packaging, operates in catering, transports or stores products, or performs another activity covered by the scheme.

The Version 7 structure includes ISO 22002-100:2025 alongside the applicable sector-specific standards. Organisations should use the official scheme’s food chain category table to establish the correct combination rather than selecting a standard based only on their company name or general industry description.

3. Review of Existing Procedures and Records

The new standards require businesses to assess whether their existing PRP procedures meet the applicable requirements. A procedure that worked under Version 6 should not automatically be assumed to meet Version 7.

The review should cover written procedures, responsibilities, monitoring records, inspection schedules and evidence that controls are followed in practice. Where changes are necessary, the organisation should update the relevant documents and train the employees responsible for carrying out the procedures.

FSSC 22000 Version 6 vs Version 7: What Has Changed?

The differences go beyond replacing one set of PRP documents with another. Version 7 also revises aspects of the certification scheme and clarifies requirements that organisations must consider during implementation.

AreaVersion 6Version 7
PRP standardsUses the applicable ISO/TS 22002-x standards and other specified PRP documentsIncorporates the ISO 22002-x:2025 series
Common PRP requirementsBased on the previous applicable documentsIntroduces ISO 22002-100:2025 as a common foundation
Sector-specific requirementsDetermined by the relevant Version 6 scheme scopeMust be reviewed against the applicable Version 7 sector-specific standard
Food chain categoriesUses the Version 6 category structureProvides a revised structure for food chain categories and subcategories
SustainabilityIncludes existing scheme requirements relevant to sustainabilityStrengthens requirements supporting the UN Sustainable Development Goals, including food loss and waste and sustainable packaging
TransitionPrevious upgrade arrangements appliedA new transition period applies to the Version 7 upgrade

The comparison reflects the changes described in the official FSSC scheme documentation. Organisations should consult the Version 7 scheme documents for the full requirements and formal change summaries.

Which FSSC 22000 Version 7 Requirements Should Businesses Review?

A gap assessment should identify the changes that apply to the organisation’s actual activities. The following areas deserve attention during the review.

Food Safety Procedures and Hygiene Controls

Review cleaning and sanitation procedures, pest control, maintenance, personnel hygiene, waste handling and other relevant prerequisite programmes. Check whether the current procedures meet the applicable revised standard and whether records demonstrate that employees follow them.

For example, a food processing facility should check its cleaning schedules, inspection records and corrective action procedures. If a requirement changes, the organisation should update the procedure, assign responsibility and retain evidence of implementation.

Packaging and Product Information

Businesses involved in product development, food packaging or labelling should review the requirements relevant to their scope. Version 7 includes strengthened requirements in areas supporting food loss and waste reduction and sustainable food packaging. The exact obligations depend on the applicable scheme clauses and the organisation’s activities.

Training and Employee Responsibilities

Employees need to understand revised procedures that affect their work. Training should cover the relevant changes, the tasks each person performs and the records they must complete.

A training attendance sheet alone does not demonstrate that a revised procedure is followed correctly. Businesses should also check whether employees understand the instructions and apply them during normal operations.

Internal Audits and Corrective Actions

Internal audits should assess compliance with the requirements that apply to the business. Once the gap assessment identifies an issue, the organisation should record the finding, investigate its cause, assign corrective action, and verify whether the action has addressed the problem. The review should also consider whether changes to procedures affect existing hazard controls or other parts of the food safety management system.

How Should Food Businesses in Kuwait Prepare for the Transition?

Companies planning FSSC 22000 Version 7 Kuwait implementation should use a documented transition plan rather than updating procedures without first checking the official requirements. A practical approach includes the following steps:

  1. Confirm the certification scope. Identify the food chain category, activities, sites, and products covered by the current certificate.
  2. Obtain the official Version 7 documents. Review the scheme, applicable PRP standards, change summaries, and upgrade process.
  3. Conduct a gap assessment. Compare current procedures and evidence with each relevant new or revised requirement.
  4. Assign corrective actions. Give each identified gap an owner, a completion date, and a method for verifying the result.
  5. Update documents and train employees. Revise procedures, forms and work instructions where necessary.
  6. Conduct an internal review. Check whether changes have been implemented and whether records demonstrate that the updated controls work in practice.
  7. Coordinate with the certification body. Confirm the upgrade audit arrangements and any specific documentation needed for the organisation’s scope.

What Is the Version 7 Transition Deadline?

FSSC 22000 Version 7 was published on 1 May 2026. The official transition schedule states that Version 6 audits may be conducted up to 30 April 2027. Upgrade audits against Version 7 are scheduled from 1 May 2027 to 30 April 2028.

Businesses should not wait until the final months to begin their gap assessments. The time required depends on the size of the operation, the condition of its existing system, the number of sites and the extent of the changes needed.

These are scheme transition dates, not Kuwait-specific legal deadlines. Organisations should confirm their own audit schedule with their certification body.

What Should Businesses Check Before Choosing a Certification Provider?

Businesses seeking FSSC 22000 certification Kuwait should distinguish between consultancy and certification. A consultant may review documents, identify gaps, explain requirements, and help the organisation prepare its food safety management system. A certification body conducts the certification audit and makes certification decisions under the applicable scheme rules.

Before appointing a certification body, confirm that it is licensed by Foundation FSSC for the relevant scheme and scope. The official FSSC register of certified organisations is also useful when checking existing certificates.

For food safety certification Kuwait, companies should also consider the scope of the certificate, the sites and activities included, and whether the certification meets their customers’ requirements. Certification does not replace applicable food safety laws or the business’s responsibility to produce and handle food safely.

How Finsoul Network Kuwait Supports Preparation

Finsoul Network Kuwait offers consultancy for businesses reviewing their management system requirements. Organisations preparing for the Version 7 transition should first establish which PRP standards apply, assess gaps in their current procedures, and set out the changes needed before an audit.

Businesses looking for FSSC 22000 consultancy Kuwait should confirm the scope of the consultancy, the documents to be reviewed, and the expected preparation work. Consultancy supports implementation but does not guarantee certification or replace an independent certification audit.

Conclusion

The main focus of FSSC 22000 PRP changes is the revised prerequisite programme framework, including the common ISO 22002-100:2025 standard and the applicable sector-specific requirements. Businesses should review their current procedures, update records where necessary, and verify that employees follow the revised controls.

For companies planning FSSC 22000 Version 7 Kuwait implementation, an early gap assessment gives management time to address deficiencies before the upgrade audit. Finsoul Network Kuwait offers consultancy for businesses preparing their management systems, while certification remains the responsibility of an appropriately licensed certification body.

Office Address: Al Hamra Tower & Mall, 159 Street 35th, Kuwait City, Kuwait
Number: +973 3383 2422
Email: info@isoconsultancykuwait.com

Frequently Asked Questions

Is FSSC 22000 Version 7 mandatory for certified businesses in Kuwait?

The Version 7 transition applies to organisations certified under the FSSC 22000 scheme, including those operating in Kuwait. Version 6 audits are permitted through 30 April 2027, followed by the Version 7 upgrade audit period from 1 May 2027 to 30 April 2028. Confirm the applicable schedule with the certification body.

Do businesses need to replace all their food safety procedures?

Not necessarily. Businesses should compare existing procedures with the requirements applicable to their scope. Some procedures may remain suitable, while others may need revision, additional records, or better evidence of implementation.

Which ISO 22002 standard applies to a food manufacturer?

A food manufacturer generally needs to consider ISO 22002-100:2025 alongside ISO 22002-1:2025. The applicable requirements should be confirmed against the organisation’s activities and the Version 7 scheme documents.

Can a consultant issue an FSSC 22000 certificate?

No. Consultancy and certification are separate functions. An organisation must undergo the required audit through an appropriately licensed certification body to obtain certification.

What records should a Kuwait food business review before its FSSC 22000 Version 7 audit?

A food business should review its hazard analysis, cleaning and sanitation records, pest control logs, staff training records, maintenance schedules, supplier approvals, and internal audit findings. It should also check that its prerequisite programmes meet the applicable ISO 22002:2025 requirements under FSSC 22000 Version 7.

 

Leave a Comment

Your email address will not be published. Required fields are marked *

Table of Contents

Book An Appointment

Scroll to Top